跳至主要内容

全自动裱纸机的安装与调整

机器的安装与调整
　　（一） 机器的安装
用户接到该机器,打开包装后，应仔细检查整机是否完整无损,随机文件及随机工具是否齐全。

该机重量较轻，地基直接采用水泥地面即可。平面尺寸见图二。

机器按图二所示摆放就位后，应用水平仪将机器的水平调整到位。


　　（二） 电气控制操作
　　 准备工作

　　机器电气控制柜操作面板，在开机时，先将电柜内的总电源开关及控制电源开关打开。拨动马达开关4至ON的位置，主机变频器得电，按下起动按钮8，主电机进入可调速运转状态，此时通过调节变频器控制面板上的旋钮11调整机器转速至满意状态。

　　打开12及13风机按钮用以控制底纸在到达前规前的平稳运行。将“光电与自动”旋钮开关10转换至“光电”位置。当机器的其它一切准备工作就绪后，将“胶泵”按钮5旋至“自动”位置。打开“压合机”旋钮3使其旋至ON位置；然后按图四所示进行压合机的调速工作。

深圳市欧野机械有限公司

地  址：深圳福田区梅林路福多工业区

联系人：代先生

手  机：18823852826（深圳） 

            15338368035（东莞）
电  话：0769-89802030
微  信：oyea1688

公众号：szoyea
E-mail：1659590865@qq.com 
    oyea1688@gmail.com

评论

发表评论

此博客中的热门博文

Valiani Cutting Blades

Blades are inexpensive and will cut from 90 up to 160 average openings depending on the quality of the mat used as well as the mat opening size. Set Blades (L100, L500)    Set of 100 or 500 Blades for ASTRA, MAT PRO-i, CMC-ix, SUPREME-is, PLUS-is, GTO-i. Eco Blades (L100C, L500C)    Set of 100 or 500 Eco Blades for ASTRA, MAT PRO-i, CMC-ix, SUPREME-is, PLUS-is, GTO-i. Blades (L100S-1P)    Set 100 blades: Single Edge blade for 45° Heads -  Face-Up & Face-Down.  blade for 45° Heads -  Face-Up & Face-Down. V-EL Blades    Special Blades for ELLISSOMATEC and V-ELL 120 Oval/Circle Cutter   OYEA Knives manufactures and supplies a full line of both STANDARD and CUSTOM leather cutting knives and blades. All of our standard leather cutting knives are manufactured to exceed the exact OEM standards.  ...
发表评论
阅读全文

Roland vinyl cutter plotter blades

Replacement Roland vinyl cutter blade, drag knife blade, vinyl cutting knife wit h 30°, 45° or 60°. A replacement vinyl cutter blade for Roland cutting plotter and CNC machines drag knife holder. High quality and hardness, low wear. Roland vinyl cutter blade applications and specifications. - 60° (red, offset: 0,25mm)- for thin films / thin materials and hard materials - 45° (blue, offset: 0,25mm)- universal, for standard materials and for medium-hard materials - 30° (green, offset: 0,25mm)- for thick materials and for small fonts Length: approx. 23 mm Diameter: approx. 2 mm OYEA Knives manufactures and supplies a full line of both STANDARD and CUSTOM leather cutting knives and blades. All of our standard leather cutting knives are manufactured to exceed the exact OEM standards.                     \ If you have more questions to know ,please contact us .   Tel: +86-0769-8...
发表评论
阅读全文

كاكين Comelz,شفرات Comelz

发表评论
阅读全文