Esko Knife blades for the XN and XL Series, Kongsberg Knife blades for the XN and XL Series

 Esko/Kongsberg Knife blades for the XN and XL Series

Product name Stock #	Length / edge angle	Application
1	BLD-SF186 Sales code: g42417444	40.0mm 1.587" 21°	Widely used for corrugated samplemaking. Can be used for qualities up to and including DW when the guide pin is installed. Also used for FC but tip is quite brittle and the blade is subject to flexing.
10	BLD-SF110 Sales code: g42436063	39.5mm 1.555” 23°	Good choice for folding carton. More durable than the ASR and cuts with less plough effect in the cut edges. Also suitable for varnish blankets in the MicroCut Tool.
4	BLD-SF177 Sales code: g42429795	36.8mm 1.450" 39.5º	Used by many customers for FC samplemaking. Produces a nice cut in thin carton. Tip will last long, due to edge angle. Can also be used for chipboard. Good choice for cutting varnish blankets. It can be seated to the bottom of the knife adapter (in most cases).
5	BLD-SF184 Sales code: g42441840	24,5mm .965” 32,5º	Good standard blade for folding carton, and other thin, compact materials such as polycarbonate and other synthetics. The SF184 is very rigid and will bend less than most other standard carbon steel blades. At the same time the grind angle gives nice cut line quality in folding carton. Max. cutting thickness: 6mm - ¼”
6	BLD-SF102 Sales code: g42411041	47.5mm 1.870" 23°	Triple wall samplemaking. A near-equivalent to this blade is the Martor Solingen #28 blade.
41	BLD-TZ129 Sales code: g42435636	53°	Super-trapezoid, deep-edged blade, used with the V notch knife and the HD-knife tool. This blade is thicker and stiffer than standard trapezoid blades and will give a more accurate cut. Thickness 0.9mm - .035”
42	BLD-TZ192 Sales code: g42424374	53°	Super-trapezoid, deep-edged blade, used with the V notch knife and the HD-knife tool. This blade is thinner than the TZ129 blade and will give very good result used in fluted core board. Thickness 0.6mm - .024”

43	BLD-TZ511 (trapeze shaped) Sales code: g42448589	53°	Trapezoid shaped blade for v-notching. Very good blade for V-notch cutting in though materials such as Re-board, X-board and triple wall corrugated. Cuts materials up to about 17mm. Made from a special Tungsten Carbide alloy, to extend cutting cycles. Thickness 0.6mm - .024”
44	BLD-TZ512 (trapeze shaped) Sales code: g42448597	53°	Very good blade for V-notch and straight cutting with the HD-knife tool in though materials such as Re board, X-board and triple wall corrugated. Cuts materials up to about 17mm. Made from a special Tungsten Carbide alloy, to extend lifetime. Thickness 0.9mm - .035”
BLD-DF570 (trapeze shaped) Sales code: g42455 279	45°	Specially made blade for the VI45-16 V-notch insert tool. Works well in materials such as fluted core boards and triple wall corrugated. Cuts materials up to about 16mm. Made from a special Tungsten Carbide alloy, to extend lifetime. Thickness 0.9mm - .035”

**Esko(Kongsberg)Knives/Blades

 

 

 

 

 

***

       

Kongsberg Conveyor belts/Cutting Underlay

  

***

 

Esko/Kongsberg Milling & Router Bits